Your One-Stop Source For StarOS™ Products




About StarOS™




StarOS™ Home

User Guide

Support Forums

Additional Community Supported Documentation

Proudly Associated with the Valemount Networks Corporation

GeckoV4™ Primary core features:
  • Management is via SSH, making use of an easy to use point-and-click interface
  • Support for multiple network interfaces
  • Support for multiple IPs on each interface
  • Complete Atheros support listed below
  • Static routing
  • Policy (source) based routing
  • 802.1d bridging with STP
  • 802.1q VLAN
  • Ethernet-over-IP (EoIP) support via VDS for LAN over LAN and VPN designs
  • Dynamic routing (RIP, OSPF, BGP, OLSR, and Babel)
  • Mesh networking via OLSR and Babel
  • Captive portal / Hotspot (WISPr attribute support)
  • Network monitoring via tcpdump and ping, and beacon (real-time traffic inspection)
  • Command-shell with common networking tools
  • DHCP client and full featured server w/ static and dynamic IP assignments
  • Firewall and Port Forwarding (via internal language, or iptables pass through)
  • NAT, and Static 1:1 NAT (DMZ)
  • Class-based Queuing (CBQ)
  • Layer-7 filtering
  • Recursive DNS server
  • PPPoE Client and Server
  • Live over-the-air firmware upgrading


Qualcomm Atheros supported features:

  • Complete support for a wide range of Atheros PCI, mPCI, and PCIe devices
  • Strives to be compliance based with both FCC and CE regulations
  • Card disable support
  • Detailed association display with live stats
  • Support over 200 associations per card
  • Link distances up to 230 km
  • Full Duplex PtP (utilizes two cards)
  • Atheros SuperA/G (h/w Compression, Aggregation, and Encryption)
  • 108M Turbo (Static and Dynamic)
  • Adaptive Radio (AR)
  • Adaptive Noise Immunity (ANI)
  • Robust rate control
  • Auto, Fixed, and MAX rate support
  • Fixed and Auto channel selection
  • Channel scanlist filter
  • Cloaking (Spectrum management; 5, 10, and 20 MHz wide channels)
  • 802.11e QoS
  • 802.11h TPC, DFS v1, and DFS v2 for FCC3, ETSI, and MKK4
  • Dynamic WDS
  • 802.11i WPA & WPA2/RSN (PSK, EAP-TLS, EAP-TTLS, and EAP-PEAP)
  • Built-in WPA PSK and EAP authentication
  • Radius-based WPA EAP authentication
  • Shared-key and Open-system WEP (40, 64, and 128-bit keys)
  • Static ACLs
  • Radius ACLs w/ accounting and session limits
  • Managed support (enhanced client control)
  • Low signal threshold to eliminate clutter of distant weak radios
  • High signal threshold to eliminate clutter of nearby strong radios


Acceptance Mark Copyright © 2003  Cue-Link Corp.  All rights reserved.
Revised: 01/08/15
Back to Top